delete

A Guide to Tree Trimming 

Proper tree trimming is necessary to ensure the health of the tree. As a tree owner, you should know the basics about tree pruning and trimming if only to understand the importance of the task. You may even handle some of the simplest tree trimming jobs along the way.

Tree professionals use different techniques in trimming trees. Each technique has a certain effect on your tree, which is why you have to know what method to use to keep your trees in its best condition. But more than just knowledge, you’ll need the necessary equipment to do the job right.

Why Trim a Tree

Trees are trimmed for several reasons, but mostly to preserve the health and beauty of the tree. Listed below are the specific reasons why it is important for you to hire Brantford tree trimming experts periodically.

1. Aesthetics

Trimming maintains the tree’s appearance and shape. But then again, you must not impose any unnatural size or shape on the tree. The tree should be trimmed just right or it will be seriously damaged.

2. Safety

Trees will eventually have broken or dead branches. Tree trimming takes care of this so that none of its limbs would fall off and cause injuries and property damage. Unkempt trees may pose to be a serious safety hazard. Its limbs might be reaching the power lines and that means potential fire. Some branches may be obstructing the driveway and that’s an accident waiting to happen. If you’re not sure if your tree is such, talk to an arborist right away.

3. Health

Trees may be infected by a disease or it may be the favorite breeding ground insects. If this happens, you have to trim some of its affected limbs so that the problem won’t get worse. Without proper trimming the decay may spread and the insects may proliferate, leaving you with no option but to cut the tree entirely.

Tree Trimming Tips

If you think that you can handle simple tree trimming jobs, don’t so without following the tips and tricks we have listed below. These will generally help you do the right thing, even if you’re just a novice at this kind of task.

1. Trim your tree during the dormant season.

The dormant season is when the tree is not in its prime condition. Either fall or winter is a good time to trim trees. While you may trim trees at any time, these are the best seasons to do it because there are no new blossoms on the tree.

2. Inspect the branch to be removed.

Branches that are less than 5 cm in diameter may be removed. Don’t do so if it is bigger than that or it will affect the growth of the tree. If you need to remove a limb that’s more than 10 cm, be sure that you have a really good reason to do so. If you’re unsure, talk to an arborist.

3. Trim only weak branches.

You know what weak branches look like. But you can also trim the ones that are V-shaped had narrow angles. You don’t want these branches on your tree. Be sure to retain limbs that are strong and follows a U-shaped angle.

delete

Various Types of Wall Anchors

Wall anchors guarantee that the wall you have can carry a load. The type of anchor you need will depend on the type of project you have, its weight, how it will be installed and remove, and the material of the wall. Other considerations include a special tool that other anchors might need upon installation, limitations, and other things.

Here are some popular wall anchors and where best to use them.

1. Expansion Anchor

This anchor type got its name from its own ability. Once anchored and fully placed, it spreads and expands. This makes the hold stronger. They are usually used with concrete and masonry but they can be as effective in other things.

2. Hollow Wall Anchor

Hollow wall anchors usually provide a permanent screw thread to any material attached to them. As this anchor is being tightened, it expands and goes deeper into the wall. Manual hammering will install the anchor. Drilling will make it faster.

3. Cement Board Anchor

As the name suggests, this type of anchor is best used for attaching cement to steel and wood materials. It can also be used for attachments in the bathroom specifically the bathtub, and also for the flooring, kitchen, and more. They come in rust-resistant ones so always ask the store if you are looking for this one.

4. Plastic Hollow Wall Plug

Since this is made from plastic, drilling a hole first is necessary. These plugs are usually used in lighter applications such as plaster or drywall. After installing the screw, the plug will lock and hold its place.

5. Winged Plastic Anchor

Like plastic hollow wall plugs, these too will need a hole to be drilled first. They will also require a special tool to expand the wings once they’ve been inserted. But unlike the former, they have more weight capacity and strength when it comes to holding a load.

6. Threaded Drywall Anchor

These anchors are best for medium-capacity applications. They are easy to install. In fact, they can be removed, reused, and placed to another location. They provide a tight hold but also an easy removal. They come in nylon, plastic or coated with zinc.

7. Toggle Bolt

This is the traditional type of anchor. It consists of a toggle and a bolt. Toggle bolts to be used will depend on the diameter and length of the screws. They are best used for heavy loads. They will also need a drilled hole as well before they can be installed.

8. Spring Anchor

Spring anchors are actually the ones that hold the expansion springs to help them hold the weight. They use the standard hole and are available in four different kinds: fixed hole, swivel hole, single groove, and multiple groove. They are also relatively cheaper compared to others which make them a good choice.

It can be confusing which anchor to use for which type of wall. If you are looking to hang a project on your wall and you have drywall, you might want to check your drywall first. For installation and repairs, commercial drywall contractor Aurora IL will help you.