Various Types of Wall Anchors

Wall anchors guarantee that the wall you have can carry a load. The type of anchor you need will depend on the type of project you have, its weight, how it will be installed and remove, and the material of the wall. Other considerations include a special tool that other anchors might need upon installation, limitations, and other things.

Here are some popular wall anchors and where best to use them.

1. Expansion Anchor

This anchor type got its name from its own ability. Once anchored and fully placed, it spreads and expands. This makes the hold stronger. They are usually used with concrete and masonry but they can be as effective in other things.

2. Hollow Wall Anchor

Hollow wall anchors usually provide a permanent screw thread to any material attached to them. As this anchor is being tightened, it expands and goes deeper into the wall. Manual hammering will install the anchor. Drilling will make it faster.

3. Cement Board Anchor

As the name suggests, this type of anchor is best used for attaching cement to steel and wood materials. It can also be used for attachments in the bathroom specifically the bathtub, and also for the flooring, kitchen, and more. They come in rust-resistant ones so always ask the store if you are looking for this one.

4. Plastic Hollow Wall Plug

Since this is made from plastic, drilling a hole first is necessary. These plugs are usually used in lighter applications such as plaster or drywall. After installing the screw, the plug will lock and hold its place.

5. Winged Plastic Anchor

Like plastic hollow wall plugs, these too will need a hole to be drilled first. They will also require a special tool to expand the wings once they’ve been inserted. But unlike the former, they have more weight capacity and strength when it comes to holding a load.

6. Threaded Drywall Anchor

These anchors are best for medium-capacity applications. They are easy to install. In fact, they can be removed, reused, and placed to another location. They provide a tight hold but also an easy removal. They come in nylon, plastic or coated with zinc.

7. Toggle Bolt

This is the traditional type of anchor. It consists of a toggle and a bolt. Toggle bolts to be used will depend on the diameter and length of the screws. They are best used for heavy loads. They will also need a drilled hole as well before they can be installed.

8. Spring Anchor

Spring anchors are actually the ones that hold the expansion springs to help them hold the weight. They use the standard hole and are available in four different kinds: fixed hole, swivel hole, single groove, and multiple groove. They are also relatively cheaper compared to others which make them a good choice.

It can be confusing which anchor to use for which type of wall. If you are looking to hang a project on your wall and you have drywall, you might want to check your drywall first. For installation and repairs, commercial drywall contractor Aurora IL will help you.